NOTE: Motions, Glass breaks, Smokes, and CO 345 devices use the default loop 1.
D/W sensors use loop 2 for the internal reed switch. You must manually change the loop in the IQ Panel 2 sensor programming page.
D/W sensors use loop 1 if you're using the external hardwired auxiliary input
Compatible with 345MHz IQ Panel 2 + version 2.1.0 and higher.
Honeywell / 2GIG tested compatible device list:
| Honeywell | Door / Window Sensor | 5816 | Loop 1 - External Contact |
| Honeywell | Door / Window Outdoor Sensor | 5816OD | Loop 2 - Internal Reed Loop 1 - External Contact |
| Honeywell | Door / Window Slim Line Sensor | 5920 L | Loop 2 - Reed Switch Loop 1 |
| Honeywell | Shock / Door Sensor | 5819WHS | Loop 1 - Shock Loop 3 - DW Ext |
| Honeywell | Motion Sensor | 5800 PIR-RES | Loop 1 |
| Honeywell | Auxiliary Pendant | 5802WXT | Loop 1 |
| Honeywell | Key Fob | 5804 | N/A |
| Honeywell | Key Fob | 5803-4 | N/A |
| Honeywell | Temperature & Flood Detector | 5821 | Loop 1 - Freeze Loop 3 - Flood |
| Honeywell | Carbon Monoxide Detector | 5800CO | Loop 1 |
| Honeywell | Smoke Detector | 5808W3 | Loop 1 - Smoke Loop 2 - Heat Loop 3 - Freeze |
| Honeywell | Glass Break Detector | 5853 | Loop 1 |
| Honeywell | Tilt Sensor | 5822T | Loop 3 |
| 2GIG | Door / Window Sensor | DW10 | Loop 1 - External Contact Loop 2 - Internal Reed |
| 2GIG | Recessed Door Sensor | DW20 | Loop 1 |
| 2GIG | Panic Button | 2GIG-Panic-345 | Loop 1 |
| 2GIG | 4 Button Key Fob | 2GIG-Key2-345 | N/A |
| 2GIG | Motion Detector | 2GIG-PIR1-345 | Loop 1 |
| 2GIG | Glass Break Detector | 2GIG-GB1-345 | Loop 1 |
| 2GIG | Smoke Detector | 2GIG-SMKT3 | Loop 1 - Smoke Loop 2 - Heat Loop 3 - Freeze |
| 2GIG | Carbon Monoxide Detector | 2GIG-CO3-345 | Loop 1 |
| 2GIG | Gun Motion Detector | 2GIG-GNGRD1-345 | Loop 1 |
| 2GIG | Hardwire to Wireless Translator | 2GIG-TAKE-345 | Loop 1 |