-
Take a Peek-in from the Qolsys IQ Panel 2/2+ camera
Peek-Ins allow users to take on demand snapshots from the Qolsys IQ Panel 2 panel camera using the Customer Website and app. Captured Images are saved in the Imagesevent gallery. For more information about viewing the event gallery, see View the Images Event Gallery and Past Events . Compatibili... -
Connecting the Skybell to built-in Access Point
You will need Pro Video and Doorbell Cameras enabled on your Alarm.com service plan. From the Alarm.com app and go to drop-down menu - select Doorbell Camera Add Doorbell Camera Select Begin Name your doorbell device Go to your Wifi settings on your phone and select the Skybell Wifi Connect to t... -
View the PowerG PIR camera images for a Qolsys IQ Panel 2
PowerG PIR cameras (PG9934 and PG9944) enrolled on a Qolsys IQ Panel 2 can upload alarm and Peek-in Now images to Alarm.com. Captured images are saved in the Images event gallery. For more information about viewing the event gallery, see View the Images Event Gallery and Past Events . Requiremen... -
Here's how to enable the Live Video Cameras and Doorbell Camera streaming to the control panel screen. Log into www.alarm.com user web portal. Go to Video --> Settings --> Stream Video to Security Panel Screen -- Select each camera you want to stream to the panel. Up to 40 cameras allowed....
-
Connecting to Alarm.com IP Cameras using WPS
Step 1: Log into Alarm.com Step 2: Go to Video (must be enabled in service plan) Step 3: Go to Settings Step 4: Add Video Device Step 5: Find your video device tutorial Step 6: Go to IQ Panel Advanced Settings --> Installation --> Devices --> Wifi Devices --> Access Point Settings --&... -
IQ Panel 2 / 2+ - How to get disarm photos from your panel camera to your Alarm.com devices?
Q: How do you get disarm photos and alarm photos from your IQ Panel 2 camera sent to your Alarm.com account and sent to your devices? A: NOTE: You will need Image Sensor as part of your Alarm.com service plan. Log https://www.alarm.com/login from a computer. Go to Image Sensor --> Rules. You ... -
IQ Panel 2 / 2+ - Repeaters with S-line sensors and other devices
For larger installations, you may need to add an RF repeater in order to increase range for your devices to reach the panel. For S-line sensors through a repeater, you need to edit the sensors "Signal Source" to turn OFF the S-line and change to SecurityRF-319. You can find this at the bottom ri... -
How to upgrade from 1.5 and below
If your version is behind or incompatible with the IQ Panel, you're IQ2 must be updated over Wifi using this process. Delete IQ2 from main panel Do two master resets on IQ2(s) back-to-back Reconnect to Wifi on IQ2 Grab IP address and add to main panel, stay on Wifi connect screen Add IQ2 to main... -
IQ Panel 2 /2+ - Configure Camera image uploads for alarms or local disarms
Qolsys IQ Panel 2 / 2+ camera images uploads for local disarms and alarms can be configured using the Customer Website. Captured images are saved in the Images event gallery on the Customer Website or app. For more information about viewing the event gallery, see View the Images Event Gallery and... -
IQ Panel 2/ 2+ - Dialer delay settings
Dialer delay settings depend on whether SIA limits are enabled. If SIA Limits are enabled: | Default | 30 seconds | | ------- | ---------- | | Minimum | 15 seconds | | Maximum | 45 seconds | If SIA Limits are disabled: | Default | 30 seconds | | ------- | ---------- | | Minimum | 0 seconds | ... -
IQ Panel 2 / 2+ - Enable Doorbell Camera notifications to Qolsys IQ Panel 2
To enable Doorbell Camera notifications to the Qolsys IQ Panel 2: | | | | --- | --- | | Service package | One of the following: * Pro or Commercial Video with Doorbell Cameras * Basic Doorbell | | IQ Panel 2 | Firmware version 2.2.1+, and connected to their router's Wi-Fi network. Note: The Do... -
Connecting the Skybell to built-in Access Point
You will need Pro Video and Doorbell Cameras enabled on your Alarm.com service plan. From the Alarm.com app and go to drop-down menu - select Doorbell Camera Add Doorbell Camera Select Begin Name your doorbell device Go to your Wifi settings on your phone and select the Skybell Wifi Connect to t... -
Install the 16-F Hardwire Translator to the IQ Panel 2/2+
Step 1: install the hardware Mount the IQ Hardwire 16-F vertically in your desired location Install the provided antenna into the “ANT” terminal at the top of the unit free from obstructions If mounting inside a metal can, the antenna must extend outside the enclosure to ensure RF communication ... -
IQ REMOTE BEST PRACTICES: Step 1 – Update the Software to 2.5.3 2.5.3 has the following IQ Remote improvements: Sound/Voices Fixed an issue where IQ Remote could stop chiming. Added Severe Weather Alert annunciation to IQ Remote when enabled on the primary Panel. Network Connectivity Fixed an is...
-
Stream live video from Alarm.com cameras to the IQ Remote
Alarm.com customers with an IQ Panel 2 / 2+ and IQ Remote can view live streams from their compatible Alarm.com video cameras using both the Qolsys IQ Panel 2 / 2+ and IQ Remote screens. Feature requirements To stream live video from the IQ remote, customers must: Have live video streaming on ...