TSB #: 170925
RE: IQ PANEL 2 - 2.0.5 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
• “Advanced Sensor Test” for panels with RF PIC VERSION 10.2.15-G1. This new tool graphs the RF sensor signal
strength and shows actual dBm from a particular sensor as well as the relative noise floor for the RF environment
in the home.
• Improved mapping of cellular signal strength on the panel
and on Alarm.com for 4G LTE connections
• IQ Remote fixes
Compatibility Note: Your IQ Panel must be on software version 2.0.1 or higher and connected to Wi-Fi to install this update
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”
3- Enter a valid installer code (default is 1111)
4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch iqpanel2.0.5 then touch OK
6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi). Update will download and install
7- Once complete touch "OK" to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.