TSB #: 180219
DATE: 02/19/18
RE: IQ PANEL 2 - 2.1.0 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
New Features:
• IQ Remote (QW9102-840) — 7” secondary keypad now fully supported:
• Full access to security & automation (lights, locks, thermostats & garage doors)
• Disarm photos from the built in camera (local only does not push to the backend)
• Support for full 4 day weather forecast & dealer logo
• Independent display & sound controls for voices & chimes
• Learns in as a supervised zone
• Live Video Cameras on Panel (BETA):
• View the live video feed from your Alarm.com cameras directly on the 7” panel screen
• Supports live view of up to 40 cameras, models: ADC-V521IR, ADC-V522IR & ADC-V722W
• Beta starts 2/26/18. Contact your Alarm.com ADE for more details and to sign up.
• Manage My System - An all new page on the panel that allows the end user to help keep their Wi-Fi connected, their panel software up to date and to control the BLE radio on the panel
• Panel Thermostat page now supports Hi/Low temp settings for thermostats set to Auto Mode
• Nighttime mode - new time based schedule for the display, voices & chimes on the panel
• Swinger Shutdown setting is now configurable
• Visual indication of auto bypassed sensors on the home screen
• New Advanced Z-Wave Diagnostics: Network Health Test, Repeater Test & Last Working Route
• Energy Monitoring Z-Wave devices are now supported on the panel and on Alarm.com
• Software support for hardwiring panic buttons to the IQ Hardwire 16 or to a wireless DW sensor
• Z-Wave sirens can now be supervised as a zone on the panel, on Alarm.com and at the Central Station
• Support for the Telus cellular network in Canada
Fixes/Improvements:
• Increased default Two Way Voice speaker volume and added remote control of speaker volume from the Alarm.com dealersite
• Added support for the CT100+ and the CT101 thermostats
• Panel Glass Break sensitivity can now be adjusted (Normal/Low)
• Panel Alarm Videos now display on the same page on the panel as Disarm Photos
• Select All button for the Lights page
• New setting to enable/disable Panel Tamper reporting
• Improvement to the status of Z-Wave garage door openers on the panel
• Automated panel battery maintenance improvement
• Image sensor communication improvements
• Security improvements for KRACK Attack & BlueBorne
• Master Code now has access to BLE radio settings
• Powering down the panel using the Master Code creates a recorded event in the Panel History buffer
• Help Videos now play in full screen mode
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 2.0.1 or higher and connected to Wi-Fi to install
this update wirelessly.
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”
3- Enter a valid installer code (default is 1111)
4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch iqpanel2.1.0 then touch OK
6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi). Update will download and install
7- Once complete touch "OK" to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
For more information visit: https://login.qolsys.com/software-downloads/ or email: techsupport@qolsys.com