IQ PANEL 2 & 2 PLUS - 2.3.4 SOFTWARE UPDATE - RELEASE NOTES AND INSTRUCTIONS

TSB #: 190731
DATE: 07/31/19
RE: IQ PANEL 2 & 2 PLUS - 2.3.4 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
Fixes/Improvements:
• Includes all fixes and improvements from the IQ Panel 2 & 2 Plus 2.3.3 Software Update (https:// dealers.qolsys.com/wp-content/uploads/2019/05/TSB-190508-233-Update.pdf)
• Includes all fixes and improvements from the 80.25 PowerG Modem Firmware Update (https:// dealers.qolsys.com/wp-content/uploads/2019/06/TSB-190621-80.25-PowerG-Update.pdf)
• Pin change to better recognize the PowerG daughter card upon reboot
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 2.0.1 or higher and connected to Wi-Fi to install
this update wirelessly.
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”
3- Enter a valid installer code (default is 1111)
4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch iqpanel2.3.4 then touch OK
6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi). Update will download and install
7- Once complete touch "OK" to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will
take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
For more information visit: https://login.qolsys.com/software-downloads/ or email: techsupport@qolsys.com