The IQ4 v4.3.0 and higher version panels have a feature that can display the ambient temperatures detected by PowerG devices. This feature allows the client to review a list of PowerG devices and see the ambient temperature readings from these devices.
To enable the option :
Go to Settings >Advanced settings > Installation > Dealer/Installer settings > Temperature Reporting - Check the box
The third tab on the security page (Active /ALL/Ambient) shows the temperature from various PG devices.
The temperatures can be viewed in degree C or Fahrenheit (F) ( can be changed under the settings tab)
These are the list of compatible sensors that has the option of temperature reporting :
Model # Description :
107 PGx312 Outdoor Contact w/External Input
110 PGx309 Contact w/External Input
111 PG9200AX Short Range IR Receiver
112 PG9920AX Short Range IR Transmitter
113 PG9350SL Long Range IR Receiver
114 PG9350SL Long Range IR Transmitter
126 PGx914 Flat PIR
127 PGx862 Ceiling PIR
128 PGx872 Commercial Ceiling PIR
129 PGx902 Outdoor Curtain PIR
150 PGx984 Dual Tech PIR/Microwave
161 PGx922 Glass Break Detector
202 PGx936 Smoke/Heat Detector
202 PG9936H Heat Detector
221 PGx933 CO Detector
250 PGx905 Temperature Sensor