How to Enroll on IQ Panel :
1. On the panel screen, swipe down from the top-center of the screen to pull down the
quick setting menu
2. Select Settings. Then select Advance Settings and enter your Installer/Dealer code
3. Select Installation, then Devices, Security Sensors, and select Auto Learn Sensor
4. Pull the battery tab to power the device for enrollment
5. If the devices appear on screen requesting to be added with the matching DLID
select ok and program your device
6. If the device does not appear on screen requesting to be added, open the device by
removing the screw cover and remove the Phillips screw to release the cover
7. Hold the shallow white enroll button located between the battery and auxiliary input
until the LED light onboard turns solid yellow then immediately release the button
8. It will now appear on the panel requesting it to be added with the matching DLID
9. Select ok to enter programming. By default, the input mode is set to Reed Switch. To
use auxiliary input, select the drop-down menu on Input Mode and select Auxiliary
input Normally Open, Normally Closed, or End of Line. (When aux input is selected
the sensor type can now be changed from door/window to desired sensor type.)
10. When desired programming is completed select Add New