QOLSYS Logo

IQ PANEL 1.5.1 SOFTWARE UPDATE - RELEASE NOTES AND INSTRUCTIONS

TSB #: 112315
DATE: 11/23/15
RE: IQ PANEL 1.5.1 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS

Release Notes:

1) Added support for new Z-Wave devices
1) Qolsys IQ Outlet - QZ2130-840
2) Qolsys IQ Dimmer - QZ2140-840
3) Aeotec Heavy Duty Smart Switch - ZW078-ZWUS
4) Aeotec Smart Switch 6 - ZW096-A02
5) Aeotec Home Energy Meter - DSB0904-ZWUS
6) FortrezZ Water Valve - WV-01
7) Linear Garage Door Opener - GD00Z-4* (Local IQ Panel control only, no remote Alarm.com access)
2) Create simple Z-Wave lighting rules on the IQ Panel
1) Night: Turn light on at 7pm and off at 6am
2) Evening: Turn light on at 7pm and off at 11pm
3) Front Door: Turn light on for 15 minutes when sensor called “Front Door” is opened
4) Doorbell: Turn light on for 15 minutes after IQ Doorbell is activated
3) Save Disarm Photos and Alarm Photos to an SD Card
4) Enhanced Alarm.com Wellness support. New occupancy sensor type for “Bed,” “Chair” & “Pendant” sensors
5) If auto-bypass disabled, pop up window displayed if sensors are open or tampered during arming (“Protest”)
6) Home button now wakes the panel when display is off
7) Enable/disable individual panel panic buttons (Fire, Police, Auxiliary)
8) Added “Get Status” button for Home Control devices. This allows the user to manually request the current status of ZWave devices without requiring the IQ Panel to load them automatically
9) Fixed a memory issue that could cause the user interface to become unresponsive
10) Various other fixes and improvements

Update Instructions:

Compatibility Note: This is an incremental update. Your IQ Panel must be on software version Q1.4.3 and connected to Wi-Fi to install
this update wirelessly. If your panel's software version is Q1.4.2 or lower you will need to update to 1.4.3 before you will be able to update
to 1.5.1. IQ2’s that are paired with the IQ Panel will automatically be updated to the IQ2 1.5 software after the 1.5.1 IQ Panel software is
applied.
1- Touch "Settings"
2- Enter a valid installer code (default is 1111)
3- Touch "Installation"
4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch systest151 then touch Done, then OK
6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi) Update will download and install
7- Once complete touch "OK" to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5
minutes. After the panel reboots the home screen will appear and the buttons will turn green. If IQ2‘s are paired with the panel they will
automatically update within 5 minutes of the IQ Panel update. Do not power down or use the panel during this time.
For more information visit: http://dealers.qolsys.com/support-training/software-downloads.html or email: techsupport@qolsys.com

Aug 21, 2023

Contact Us

Not finding what you're looking for? Contact Us Directly