Please use this link - https://cms.dsc.com/download.php?t=1&id=25781
Important Note: in firmware 2.5.3 only Door/Window contacts, key fobs and motion sensors can be utilized for zone trigger types. Other zone types will be released in future firmware releases.
NEW
V1.2 Translator:
- Up to 40 hardwired zones supported by (4) HSM2108 per module
- Additional power supported by (1) HSM2300 power supply per module
- Don’t forget a PC5003c enclosure, battery and 1640 transformer
All existing PGxWLSHW8 / PGxHRDW8 can be firmware updated via DLS5 software Flash Wizard
Panel Requirements:
IQ4 v4.1 ~ Feb 28, 2022
IQ2+ v2.7.0 ~ April 2022
IQHub v3.1 ~ May 2022
- Note the Mounting Holes (4 total)
- Wall tamper is located above the PCB
- 7Ah Battery
Corbus wiring - HS2LCD Keypad:
Corbus wiring - HSM2108:
HSM2108 - Zone Expander Slots:
Corbus Wringing - HSM2300:
PGM Wiring:
Sounder Wiring:
LED Wiring:
Zone Wiring:
Motion Zone Wiring:
2-Wire Smoke Wiring:
4-Wire Smoke Wiring:
4-Wire Smoke Detectors needing additional power wiring: