QOLSYS Logo

PowerG Wired to Wireless Upgrade & Expansion Module PG9WLSHW8 Installation Manual

Please use this link - https://cms.dsc.com/download.php?t=1&id=25781

Important Note: in firmware 2.5.3 only Door/Window contacts, key fobs and motion sensors can be utilized for zone trigger types. Other zone types will be released in future firmware releases.





NEW
V1.2 Translator:

  • Up to 40 hardwired zones supported by (4) HSM2108 per module 
  • Additional power supported by (1) HSM2300 power supply per module
  • Don’t forget a PC5003c enclosure, battery and 1640 transformer

All existing PGxWLSHW8 / PGxHRDW8 can be firmware updated via DLS5 software Flash Wizard

Panel Requirements:
IQ4 v4.1  ~  Feb 28, 2022
IQ2+ v2.7.0  ~  April 2022
IQHub v3.1  ~  May 2022
W2W.jpg

  • Note the Mounting Holes (4 total) 
  • Wall tamper is located above the PCB
  • 7Ah Battery

Screen Shot 2022-05-20 at 10.16.27 AM.png
Screen Shot 2022-05-20 at 10.20.01 AM.png
Corbus wiring - HS2LCD Keypad:

Screen Shot 2022-05-20 at 10.21.05 AM.png

Corbus wiring - HSM2108:Screen Shot 2022-05-20 at 10.21.18 AM.png



HSM2108 - Zone Expander Slots:Screen Shot 2022-05-20 at 10.21.31 AM.png

Corbus Wringing - HSM2300:
Screen Shot 2022-05-20 at 10.21.39 AM.png



PGM Wiring:
Screen Shot 2022-05-20 at 10.21.49 AM.png
Screen Shot 2022-05-20 at 10.22.00 AM.png



Sounder Wiring:
Screen Shot 2022-05-20 at 10.22.07 AM.png



LED Wiring:
Screen Shot 2022-05-20 at 10.22.14 AM.png



Zone Wiring:
Screen Shot 2022-05-20 at 10.22.21 AM.png



Motion Zone Wiring:
Screen Shot 2022-05-20 at 10.22.35 AM.png



2-Wire Smoke Wiring:
Screen Shot 2022-05-20 at 10.22.45 AM.png

4-Wire Smoke Wiring:
Screen Shot 2022-05-20 at 10.22.55 AM.png
4-Wire Smoke Detectors needing additional power wiring:
Screen Shot 2022-05-20 at 10.36.25 AM.png

May 20, 2022

Contact Us

Not finding what you're looking for? Contact Us Directly