Bypass a sensor on a Qolsys IQ Panel 2/2+

On the Qolsys IQ Panel 2/2+, it is possible to bypass an open contact sensor, or any sensor with a trouble condition (e.g., tamper, low battery, offline, etc.) when arming a system from the Customer Website or app. Simply sending an arming command will automatically bypass all zones that would prevent arming. A motion sensor that has been activated, such as one that has recently detected motion, would not be bypassed if the panel is being armed away.
Note: It is not possible to select a specific sensor to bypass using the Customer Website or app. The only way to remotely bypass a sensor is to arm the system, which will trigger an automatic sensor bypass.

Auto Bypass feature

This setting only affects arming locally at the panel. Remote arming will automatically bypass all open or tampered sensors regardless of whether this setting is enabled or disabled. For more information on how to bypass a sensor directly from the security panel, see
Qolsys IQ Panel 2 User Guide
.

To enable the Auto Bypass feature using the Partner Portal:

1. Log into the Partner Portal.
2. Find the customer account.
3. Click Remote Toolkit.
4. Click to expand Timers.
5. Click Auto Bypass.
6. Using the New Valuedropdown menu, select On.
7. Click Change.

To enable the Auto Bypass feature using the MobileTech app:

1. Log into the MobileTech app.
2. Find the customer account.
3. Tap Remote Toolkit.
4. Tap Command Catalog.
5. Tap to expand Timers.
6. Tap Auto Bypass.
7. Using the New Valuedropdown menu, select On.
8. Tap Change.

To enable the Auto Bypass feature using the Qolsys IQ Panel 2:

1. Swipe down on the panel for access.
2. Tap Settings.
3. Tap Advanced Settings.
4. Enter the installer code or master code.
5. Tap Installation.
6. Tap Security and Arming.
7. Under the Arming section, verify that the Auto Bypassfeature is selected to indicate that it is enabled.